Free pressure washing invoice template, billed by the square foot

A pressure washing invoice bills each surface on its own line: the house by square foot or home size, concrete by the square foot, decks and fences at a flat price, and add-ons like gutter brightening apart from the wash. Printing the method beside each surface and your minimum charge tells the client why the roof was soft washed and why a short visit still cost $150. The sample below bills a two story house, driveway, walk, patio, deck and gutter faces for $982.50, and the Word, Excel and PDF versions are free.

Download the pressure washing invoice template

Every download keeps the Surface and Method columns, so a soft washed house and a surface cleaned driveway sit on one invoice, priced by the square foot or flat. The Word file opens in Google Docs: File, Open, Upload. The Excel file opens the same way in Google Sheets, formulas included. Free, no email required.

What goes on a pressure washing invoice

FieldWhat goes there
Business name and contactYour business name, phone and email, plus a local business license number if your city or county issues one. Leave off anything you do not hold; a clean header beats a crowded one.
Service address and surfacesThe address you washed and each surface by name: house siding, driveway, front walk, back patio, deck, fence, roof. Name them the way the quote did so the client can walk the property with the invoice.
Square feet and how you got themConcrete is length times width, so a 30 by 20 foot driveway is 600 square feet. Most house washes are priced off the home's living area from the county record or a listing site; if you measured wall area instead, say so.
Method for each surfaceSoft wash for siding and roofs, a surface cleaner for flat concrete, low pressure and a wood cleaner for decks. The Asphalt Roofing Manufacturers Association says not to use a power washer on shingles, so a roof line that reads soft wash answers the question before it is asked.
Pricing basisPer square foot or flat rate, line by line. Published lists checked in November 2026 put house washes at $0.10 to $0.35 per square foot of home and driveways at $0.15 to $0.50, with decks, fences and roofs usually quoted flat.
Minimum chargeThe least you bill for any visit, printed where it will be read. The lists we checked that state one set it between $125 and $350, because the truck, the water hookup and the setup cost the same on a 100 square foot patio as on a full house.
Add-onsGutter face brightening, oil stain treatment, rust removal and sealer each get their own line with their own price. A client who can see the add-on can say yes to it next time without renegotiating the wash.
Water source and runoffWhose spigot you used and where the wash water went. Some cities ban it from storm drains outright: Portland City Code 17.39 prohibits pressure washing wash water in the stormwater system, and San Diego calls the same discharge illegal.
Stains that did not fully liftOld oil soaked into concrete, rust from irrigation water and fertilizer, and oxidation on siding can stay after a good wash. Write down what remained so the photo and the invoice tell the same story.
Payment due and how to payResidential washes are usually due on completion. List the ways you take payment, and for a large commercial job, the terms you agreed to.

The line-item table

SurfaceMethodQtyRateAmount
House siding, two story vinyl, 2,200 sq ft home, all four sidesSoft wash2,200 sq ft$0.20/sq ft$440.00
Gutter faces, front and both sides, oxidation streaksHand brightener, flat rate1$135.00$135.00
Concrete driveway, two carSurface cleaner and post-treat600 sq ft$0.25/sq ft$150.00
Front walk and porch stepsSurface cleaner90 sq ft$0.25/sq ft$22.50
Back patio, broom finish concreteSurface cleaner240 sq ft$0.25/sq ft$60.00
Wood deck, 12 x 16 with stairsLow pressure and wood cleaner, flat rate1$175.00$175.00

How to use this template

  1. Measure before you price. Pace or tape the concrete and multiply length by width. For the house, pull the living area from the county record, or measure wall area if you price that way. The square feet on the invoice should be the same ones that were on the quote.
  2. Write the method on every line. Soft wash, surface cleaner or low pressure tells the client what touched each surface. It also covers you when a neighbor asks why your roof job did not use the big wand.
  3. Show the minimum on small jobs. When a patio rinse comes to $60 by the square foot and your minimum is $150, bill the minimum and say so on the line. A client who sees the rule once does not argue it on the next visit.
  4. Keep add-ons off the wash line. Gutter brightening, stain treatment and sealer each get a line and a price. Folded into the house wash, they read as a higher wash price; on their own, they read as extra work the client chose.
  5. Attach before and after photos. Shoot the same corner of the house and the same section of driveway before you start and after the rinse. Photos settle most questions about a streak or a stain faster than any note.

Get paid faster

Price the second story, not only the square feet

Two story homes take ladder work, longer setup and more chemical reach. One Cincinnati list we checked prices a 2,000 square foot home at $350 to $450 on one story and $400 to $550 on two, and an Austin list runs its two story washes about $100 to $500 above the one story ones.

Promise clean, not stain free

Bleach based house wash mix does not lift rust, and old oil leaves a shadow in porous concrete. Quote stain treatment as its own line, and note on the invoice what was treated and what remained.

Show a bundle discount as a line

Two of the lists we checked take $45 to $200 off when a client books more than one service. Put the discount on its own line with a minus sign so the full price of each service stays on record for next year.

Know where the water goes

Block or berm the storm drain when the job uses detergent, and route the water to grass or a sanitary drain where the city allows it. A runoff complaint costs more than the job paid.

Frequently asked questions

Do pressure washers charge by the square foot or by the job?

Both, by surface. Concrete is usually per square foot, $0.15 to $0.50 on the published lists we checked in November 2026, which puts a two car driveway at $100 to $300. House washes are quoted flat by home size or per square foot of home, and decks, fences and roofs are usually flat prices.

What is a normal minimum charge for pressure washing?

The five lists we checked that state a minimum set it from $125 to $350 per visit. The minimum covers the drive, the water hookup, setup and cleanup, which cost the same whether you wash a 100 square foot stoop or a whole house.

Should I price a house wash by living area or wall area?

Living area is the quick way and most published lists use it: one Ohio company multiplies the home's square footage from Redfin or Realtor.com by $0.20 for a starting price. Wall area is more exact for tall or oddly shaped homes. Pick one, use it on the quote and the invoice, and say which on both.

Can you pressure wash a shingle roof?

Not with high pressure. The Asphalt Roofing Manufacturers Association says not to use a power washer on asphalt shingles and recommends a solution of household bleach (sodium hypochlorite) and water. That is why roof lines on a pressure washing invoice read soft wash.

Can Staxen send a pressure washing invoice and get it paid?

Yes. Ivy the Invoicer sends the invoice when the wash is done, takes card or ACH payment through Stripe, and follows up when a payment runs late. Staxen is $59 per month per AI employee, $149 per month for all three, and the first 7 days are free in the app.

Get the Staxen app: the first 7 days are free.